How to Add LED Lights Behind Your TV: A Fun and Easy Project

Installing LED light behind your TV is a fantastic way to enhance the lighting in your living room and reduce eye strain. If you’re looking for a fun project to spice up your space, this is it!

Step-by-Step Guide to Adding LED Lights Behind Your TV

1. Measure your TV: Start by measuring the perimeter of your TV. Multiply the length and width, and then double the result. This will give you the length of the LED strip you’ll need to wrap around the edges of your display.

2. Purchase the right LED strip: Find an LED strip that is long enough to cover all the edges of your TV. Make sure it’s the correct length according to your measurements.

3. Prepare your TV: Wipe down the rear panel of your TV to remove any dust or debris. This will ensure a clean surface for the adhesive to stick to.

4. Attach the LED strip: Remove the 3M adhesives from the LED strip and fasten it to the edges of your TV. Use additional two-sided tape if needed to secure it properly.

5. Handle right angles: For 90-degree angles, you can either create a loop or use an L-shaped connector with the LED strips. This will help you seamlessly wrap the strip around the corners of your TV.

6. Power up and control: Plug the LED strip into an outlet and control the colors using the remote or an app that comes with the strip.

You have the freedom to decide how you want to align the LED light strips on your TV. Most people choose to run the strips around each side of the panel. However, if your TV is on a stand, it might be better to attach the strips only to the sides and top of the TV. Remember, most LED light strips can be cut to fit the desired length.

>>> Read more: How to Add LED Lights Behind Your TV: A Fun and Easy Project

Dealing with Tricky 90-Degree Angles

One challenge when working with LED light strips is managing 90-degree angles. While LED strips are flexible, bending them too much can cause damage. Here are two methods to handle this:

Make a Loop

The easiest way to install LED light strips at a 90-degree angle is to create a loop with the cable. This is a popular method, although the light direction may not be completely even. The loop might also stick out from behind the corners of your TV, which can be slightly distracting.

Use an L-Shaped Angle Connector

For a sharp 90-degree angle, you can use L-shaped angle connectors. These small attachments can be easily installed to create a polished look. Make sure to buy a solderless snap-down kit with connectors that match the number of pins on your best led light strips. Align the strips with the positive and negative symbols on the connector, and repeat this process for all four corners of your TV.

Using L-shaped connectors requires a bit more effort, but the end result looks much better.

Determining LED Strip Length for Your TV Size

Finding the right LED strip length for your TV can be a bit tricky, as TV dimensions vary. However, you can measure the perimeter of your TV to get an estimate. Keep in mind that you won’t be installing the LED strips right at the edges of your display. They’ll likely be placed a few inches below each side.

Here are some recommended lengths for different TV sizes:

• 32-Inch TV: A 92-inch LED strip should cover each side of the TV (233 cm, 2.33 meters).
• 43-Inch TV: You’ll need a 117-inch strip for each side of the display (297 cm, 2.97 meters).
• 55-Inch TV: To cover each side, a 149-inch strip (378 cm, 3.78 meters) is required.
• 65-Inch TV: For all sides, a 177-inch strip (449 cm, 4.49 meters) is needed.

Remember, having extra LED strip length is better than not having enough!

Recommended LED Strip Lights for TV

If you’re looking for some great LED strip lights for your TV, check out these recommendations:

• AOGUERBE LED Strip Lights with Bluetooth APP (15 meters)
• BASON Lighting LED Strip Lights for TV (2.4 meters)
• Nexillumi LED Lights for TV (4.2 meters)

Controlling the Lights

Each LED strip comes with its own controller, which could be a dial, buttons, remote, or an app. For maximum customization, it’s recommended to choose LED strips that use an app. This way, you can create custom color themes and easily adjust the lighting according to your preferences.

Preventing LED Strip Lights from Falling

If your LED light strips tend to fall down, it’s likely because the adhesive provided is not strong enough. To fix this issue, consider using two-way tape to secure the lights to the frame of your TV.

>>> Read more: How to Control LED Lights with Your Phone?

Benefits of Adding Light Strips Behind a TV

Adding light strips behind your TV offers several benefits, including:

• Improved ambient light: Enhance the lighting in your room with subtle, indirect light from the LED strips.
• Reduced eye strain: Soft, ambient lighting can help reduce eye strain, especially when watching TV in a dark room.
• Enhanced visuals: The LED lights can enhance the visual experience of movies and shows, making the colors appear more vibrant.
• Mood-setting: LED lights can create a cozy and inviting atmosphere, perfect for setting the mood for movie nights or gatherings.
• Night lights: LED strips can also serve as gentle night lights for children who are afraid of the dark.

In Conclusion

Adding LED lights behind your TV is a fun and straightforward project. Most light strips for room are designed to be easily installed, allowing you to enjoy improved ambient lighting in your home. Remember, for right angles, you can either create a loop with the strip or use an L-shaped connector. Get creative, have fun, and enjoy the enhanced lighting experience!