Forum » General » Suggestions » CNC brass

CNC brass

  • Multiplayer games foster Papa's Pizzeria teamwork and communication, which are essential skills both online and in real life.
     
      August 26, 2024 2:04 AM PDT
    0
  • cnc machining brass china

    With the continuous development of the profession of machining and fine
    machining, the precision requirements of machining are also constantly
    advancing. Fine machining technology is a manufacturing technology used in
    recent years, so it is more suitable for thin-walled parts. In addition, how to
    advance the processing power during the processing of large mechanical parts and
    better service became a big problem at that time. The editor reviewed the
    relevant materials and summarized the details as follows:

    Advance fine parts processing power:In the process of fine parts processing, common problems such as
    accelerated tool wear, poor machined surface integrity, and difficulty in chip
    removal will appear, which seriously affect the quality, production cycle and
    processing cost of fine parts of such materials.

    According to the theories of metal technology, metal cutting, and fine
    parts processing, the difficulties in the processing of the above materials are
    analyzed, and a set of effective stainless steel material drilling, reaming, and
    boring processing technologies are explored.

    The machining of fine parts requires ultra-lubricated machining surface and
    high machining accuracy. This requires a tool with a high standard life. Whether
    the tool is worn or not will be based on whether the quality of the machined
    surface has dropped out of tolerance.

    The standard life of diamond tools is very high, and the tool wear is very
    slow during high-speed cutting. Therefore, in ultra-fine cutting, the cutting
    speed is not restricted by the tool life, which is different from the general
    cutting rules.

      The selection of fine parts processing parameters mainly includes the
    selection of cutting tool viewpoint, the selection of cutting speed, the
    selection of cutting depth and feed speed, etc. From past experience, we know
    that if you choose a tool with a larger rake angle when processing plastic
    materials, you can effectively suppress the formation of the buildup. This is
    when the rake angle of the tool increases, the cutting force decreases, the
    cutting deformation is small, and the tool and chips The touch length becomes
    shorter.
    cnc machining precision parts china
    china cnc machining aluminum parts
    cnc car parts china
    cnc machining steel parts china

      July 31, 2023 12:03 AM PDT
    0